| Capacity: | 3t |
| Max Lifting Height: | 10.8m |
| Max Working Radius: | 10.5m |
| Dimension: | 3.5*0.8*1.9m |
| Weight: | 3T |
3-ton mini spider crane, maximum working radius 10.5 meters, maximum lifting height 10.8 meters. 2-meter fly jib can be added.
Dual power, optional EPA/Euro 5 Yanmar engine, voltage customizable.
Optional configurations: wireless remote control, basket, outrigger ground clearance sensor, overload alarm, unloading valve, etc.
Suitable for: partial roof lifting, equipment replacement and maintenance lifting on production lines in factory workshops, especially in factories with dense equipment and narrow passageways.
Advantages: Small footprint when outriggers are extended, greatly reducing interference with other work on site. Low noise in electric or hybrid models. No need for large transport vehicles or complex disassembly/reassembly.
Specifications | 3t | |
Maximum Operating Radius | 10.5m | |
Maximum Ground Lift | 10.8m | |
Winch Device | Hook lifting speed | 0-12m/min (4 ropes) |
Specification of steel wire rope | Φ8mm×50m | |
Telescopic Device | Boom form | 2.4m×6-section lifting arm（Support customization） |
Boom length/time | 3.1m-9.2m/20sec （Support customization） | |
Luffing device | Boom angle/time | 0-78°/13sec |
Gyroscope | Rotation angle/speed | 0-360 ° (continuous)/60sec |
Outrigger | Outrigger movement form | Manual screw out+oil pressure automatic support (two legs) |
Maximum extension amplitude (mm) | 4530 (length) X4370 (rear) X3700 (front) | |
Running Gear | Walking mode | Hydraulic motor drive |
Walking speed | 0-2.5km/h | |
Gradeability | 25°(36%) | |
Lithium battery motor | Voltage | 48V |
Electrical machinery | 5.5kw | |
Noise level | About 50dB | |
Battery capacity | 600AH | |
Working time | 6-7H | |
Lithium batteries come with built-in DC motors | Single power | |
Operating System | Operation type (boom/leg), manual walking | Manual operation, manual walking (optional remote control) |
Operational Characteristics | Manual operation(Optional remote control) | |
Standard configuration | Electric motor (single power) | |
Length, width, height | 3.5 meters length, 0.8 meters width, and 1.9 meters height | |
Dead-weight (T) | 3000kg | |
Track | 230 (width) 72 (pitch) 50 (section) | |
Optional Device | optional torque controller/remote control /hanging basket/Hydraulic fly jib | |
